Nissan Qashqai J11 (2018-2022) – High Beam (main-beam) Light Bulb H9 replacement / removal in 4 easy steps
This is a video tutorial where I show you how to change or replace the High Beam or main beam light bulb from the right headlight on Nissan Qashqai J11 from 2019 in just 4 easy steps.
HERE you can find the Original Osram H9 65W High Beam Bulb for the Nissan Qashqai J11: https://amzn.to/4aQKi3a
HERE you can find LED H9 High Beam Bulb for the Nissan Qashqai J11: https://amzn.to/40Rl0O3
You need: 12V H9 bulb.
As the Nissan owner’s manual tells us, at the 422 page it says that the high beam bulb for the Nissan Qashqai J11 is a 12 volt, 65 Watts H9 bulb.
1. Open the hood and remove the engine cover to create more space behind the headlight.
2. Disconnect the plug from the high beam bulb.
Remove the plug using bare hands or you can use a flat blade screwdriver.
Remove the clip using a flat blade screwdriver and then push down on the plug to come out.
3. Rotate the bulb towards the right of the car and then remove it from the headlight.
Here is the light bulb, 65 watts H9 that you can find it below in the video description!
When you want to install the new light bulb, you have to put it back in the same position that you removed it. Then you twist it back in the vertical position.
4. Mount the new light bulb on the headlight and connect its cables back.
Don’t forget to put the engine cover back and close the hood.
If you have any suggestions about new tutorials, let us know in the comments section!
Don’t forget to Like and Subscribe to our YouTube channel, Tutoriale Auto!
See also the other VIDEO TUTORIALS for Nissan Qashqai & Rogue:
Nissan Qashqai, Rogue (2014-2022) Pollen Filter replacement / removal in 9 easy steps!
Nissan Qashqai J11 & Rogue (2014-2022) Service Light Oil Reset in 5 easy steps!
How to remove / replace & clean Nissan Qashqai 1.5 dci EGR valve in 12 simple steps!
Nissan Qashqai J11 & Rogue (2014-2022) Fuse & Relay Box Location & Diagram (explanation)