TUTORIAL: Nissan Qashqai J11 (2018-2022) 1.5 DCI Diesel Fuel Filter replacement / removal in 15 easy steps.

Here is a video on how to replace or remove fuel filter on Nissan Qashqai J11 1.5 DCI diesel (2018-2022) in 15 easy steps.

For US customers:

HERE you can find Nissan Qashqai J11 Diesel Fuel Filter: https://amzn.to/409zN82

For UK & Europe customers:

HERE you can find Nissan Qashqai J11 Diesel Fuel Filter: https://amzn.to/3Yr8C79

Required tools:

  • 10 mm and 13 mm socket
  • Flat blade screwdriver
  • Ratchet

You should know that the fuel filter (diesel) in the Nissan Qashqai J11 (2018-2022) is located in the engine compartment on the right side of the car.

1. Remove the nut and two screws from the diesel filter housing using a ratchet and a 13 mm socket.

2. Take the fuel filter housing out and detach the cables from it.

3. Disconnect the gray plug.

4. Disconnect the two hoses from the fuel filter.

Put something under those hoses before you disconnect them to keep diesel fuel from running onto the engine.

Fasten the two hoses securely.

5. Loosen the screw that tightens the collar from the diesel filter using a 10 mm socket.

6. Remove the fuel filter.

7. Remove the retaining clip from the fuel filter using a flat blade screwdriver.

8. Remove that plastic part from the old filter.

The fuel filter from the Nissan Qashqai J11 1.5 Diesel can also be found after the series 16 4A 0HV 80A.

Find the Fuel Filter for Nissan Qashqai J11 (2018-2022) 1.5 dCi below in the video description!

9. Remove the plastic cap from the new filter.

10. Install the new O-Ring on the plastic part. 

11. Then install the plastic part on the new fuel filter.

12. Install the new filter on the car and connect the gray plug and the two hoses

13. Tighten the collar back

14. Refit the metal part back and fasten the two bolts and the nut

15. Turn the ignition on 5 or 6 times before starting the engine.

Follow us on INSTAGRAM: https://www.instagram.com/service_tutorials/?hl=en
SUBSCRIBE our YOUTUBE channel: https://www.youtube.com/channel/UCwObVGIK_LGIYEoJxL6k-bg

If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends.

Carista OBD2 can Diagnose, Customize and Service Your Car without any help from the mechanic or carshop!

See also the other VIDEO TUTORIALS for Nissan Qashqai & Rogue:

Nissan Qashqai, Rogue (2014-2022) Pollen Filter replacement / removal in 9 easy steps!

Nissan Qashqai J11 & Rogue (2014-2022) Service Light Oil Reset in 5 easy steps!

How to remove / replace & clean Nissan Qashqai 1.5 dci EGR valve in 12 simple steps!

How to Disable / Disconnect Start Stop system permanently on Nissan Qashqai, X-Trail, Juke (2013-2022) in 5 easy steps!

Nissan Qashqai J11 & Rogue (2014-2022)  Fuse & Relay Box Location & Diagram (explanation)

This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!

If you have any suggestions about new tutorials, you can write us in the comments section!

Don’t forget to Like & Subscribe to our  YouTube channel, Tutoriale Auto!