ServiceTutorials.com shows you how to install front doors puddle lights on VW Golf Mk5, Golf Mk6, Rabbit, Passat B6, B7, Tiguan, CC, Touran, Scirocco in just 15 simple steps.

HERE you can find OEM Door Warning Lights Puddle Lights + Cable wire for Golf Jetta MK5, MK6, Passat B6, B7, CC, TIGUAN:

Necessary tools:
– pry / trim tool (here you can find Trim Removal Tool Set for easy removal for Door Panels, Fasteners, Molding, Dashboards and Wheel Hubs: https://amzn.to/3uy4FMd)
– flat blade screwdriver: https://amzn.to/3thkKWs
– T30 Torx (you can find 12-Piece Magnetic Torx Screwdrivers Set HERE: https://amzn.to/3s9GceR)
– Pliers: https://amzn.to/3g2KVfT
– VCDS scan tool (you can find VCDS / VAGCOM scan tool for Volkswagen, Audi with best quality HERE: )

This is how the new puddle lights look like.

There are 4 puddle lights: 2 for front doors and 2 for rear doors

These are the cables for the front door puddle lights. And these are the cables for rear door puddle lights.

1. Remove the door handle using a pry tool

2. Remove those 3 screws using a T30 Torx

3. Remove the only screw from the lower side of the door panel

4. Remove the door panel releasing it from the clips and then slide it up

5. Disconnect all the cables and unclip all the wires from the backside of the door panel

6. Disconnect the grey plug from the door electronic module

7. Cut the black zip tie using pliers

8. Release the wires from the grey plug

9. Plug the “+” positive wire into the 18 position and “-“ negative wire into the 19 position

Push them in until they locked

10. Put the wires back into the grey plug

11. Connect the grey plug to the door electronic module

If the puddle light wire is too long, you can rotate it around the door cables

12. Remove the old reflector and install the new puddle light

13. Connect the wires to the puddle light

14. Install the panel door and reconnect all the cables and wires

15. Use VCDS (VAG-COM Dyagnose System) tester to turn the door puddle lights on following the next steps:

Select Control Module / 42-Door Electr. Driver / Coding – 07 /

You have to ad 64 to the “Software Coding (0-8388607)” value. (180 + 64 = 244).

Then select “Do IT” and “OK” when you see “Coding accepted”

Return to menu and follow the next steps: Select Control Module / 52-Door Electr. Pass / Coding – 07 /

You have to ad 64 to the “Software Coding (0-8388607)” value. (180 + 64 = 244).

Then select “Do IT” and “OK” when you see “Coding accepted”

Exit menu and disconnect the VCDS from the car.

Find more Cool Products for VW Golf Mk6, Jetta at the Best Price HERE:
– Carbon Fiber Mirror Cover for VW Golf Mk6: https://amzn.to/306W07A
– Stainless Steel Car Pedal for Volkswagen VW Golf Mk6: https://amzn.to/2yBQv5s
– Auto Light Sensor Headlight Switch (Coming Leaving Home Retrofit Module) for VW Golf 6: https://amzn.to/45ytoSC
– Original Waterproof for VW RCA Logo Emblem Rear View Backup Camera: https://amzn.to/3eq96AU
– Armrest Panel Microfiber Leather Protection Cover Trim:
– Door Puddle Lights for VW Golf Mk6, Jetta at the BEST PRICE:

Check these VIDEO TUTORIALS for VW Golf & Jetta!

How to install Rear Doors Puddle Lights on VW Golf Mk5, Golf Mk6, Rabbit, Jetta, Passat B6, B7, Tiguan, CC, Touran in 11 steps!

How to replace VW, Seat, Audi, Skoda key fob in 11 steps! 

How to acces hidden / secret menu in 3 steps!

How to repair door lock cylinder in 3 steps!

How to change cluster display language  with VCDS (VAG COM) in 4 steps!

Follow us on INSTAGRAM: https://www.instagram.com/service_tutorials/?hl=en
SUBSCRIBE our YOUTUBE channel: https://www.youtube.com/channel/UCwObVGIK_LGIYEoJxL6k-bg