The steering wheel airbag is an essential element for the driver’s safety in the event of an accident. If the airbag deploys accidentally or needs to be replaced for other reasons, it is important to know how to replace it correctly and safely. In this article, I will explain the steps necessary to replace the steering wheel airbag on a Hyundai Santa Fe manufactured between 2007 and 2010.

Warning: Replacing the airbag is a dangerous operation, and negligence can lead to accidental deployment or other serious problems. If you are inexperienced or do not feel comfortable doing so, it is advisable to call a specialist or an authorized service.

Tools needed:

– 10 mm socket: https://amzn.to/4hgJZ5e

– T40 Torx: https://amzn.to/3J8AU1w

– Thin & flat blade screwdriver: https://amzn.to/477zzQm

Step 1: Disconnect the negative terminal from the car battery using a 10 mm socket and wait at least 10-15 minutes before removing the airbag

Step 2: Loosen the two bolts on the left and right side of the steering wheel using a T40 Torx

Step 3: Gently pull the airbag outwards and disconnect the wire

Step 4: Disconnect the connector from the airbag using a thin blade  screwdriver

First take the yellow part out and then carefully pull the connector outwards.

If you have any suggestions about new tutorials, you can write us in the comments section!

Don’t forget to Like & SUBSCRIBE our Youtube channel, Tutoriale Auto!

Follow us on INSTAGRAM: https://www.instagram.com/service_tutorials/?hl=en
SUBSCRIBE our YOUTUBE channel: https://www.youtube.com/channel/UCwObVGIK_LGIYEoJxL6k-bg