In this video tutorial you will see how to properly jump start the car or how to connect jumper cables to the car jumpers points on Audi A3, A4 B9, A5, A6, A7, A8 (2016-2020).

Here is an Audi a4 B9 from 2019 that has no battery installed in the engine compartment. 

So, you have to do this: open the hood and you will see that on the right side of the engine you will find a red plastic cover with a plus on it. Remove that cover and you will see the positive jumper point. 

Close to positive jumper is the negative jumper point that has a minus marked on it. 

You will need to attach the jumper cables to these two jumpers points when you want to jump start the car. 

Jump starting is always strictly done by connecting positive cable to the power providing car, then to the one being started. Then the same with the negative cable, first to the one providing power and then the one to start. This is done to prevent electrical sparks and shock to the electrical system.

If you have any suggestions about new tutorials, let us know in the comments section!

Don’t forget to Like & Subscribe our Youtube channel, Tutoriale Auto!

Check more useful VIDEO TUTORIALS for Audi:

How to remove Front Cup Holder on Audi A4 B6 & B7 in 5 simple steps!

Audi A4 B7 (2001 – 2005) service light reset in 3 steps!

How to install LED LOGO PROJECTOR on Doors for Audi!

Audi Cornering Lights via fog lights activated with VAGCOM (VCDS)!

How to set up / activate auto-lock & auto-unlock automatically with VAG COM!