If you have an Iveco Daily or a Peugeot Boxer and you want to replace or change gear lever stick, you should watch this video tutorial. It might help you.

HERE you can find Iveco Daily & Peugeot Boxer gear stick lever at the best price:

Required tools:
– 13 mm socket
– T25 Torx
– a ratchet and an extension ratchet
– flat blade screwdriver

1. Lift the gear stick gaiter to have acces at the T25 Torx screw
2. Remove the Torx T25 screw
3. Remove the plastic part
4. Pop off ball joints from the gear cables
5. Release the plasti clips from the gear shift cables using a flat blade screwdriver
Insert the flat blade screwdriver into the plastic clip and turn the screwdriver then pull the cable out from the
selector mounting
6. Remove those 4 bolts using a 13 mm socket and a ratchet
7. Remove the gear selector
8. Install the new gear selector
9. Put back all the remaining parts.
After you finished, check if it’s working properly. If not, you have to adjust the gear cables.
The cost for this gear stick is between 50-100 euros.

HERE you can find Iveco Daily & Peugeot Boxer gear stick lever at the best price:

HERE you can find LED Indicator Lights and Brake Turn Signal Lights for you car:
HERE you can find All-Included Pre-Built Bundles HELIOS is 100% plug and play on almost every car:

Get the best car wax sprays, ceramic coatings and DIY car detailing products – manufactured in the USA by professional detailers for car enthusiasts and everyday drivers alike. These easy to use detailing products will give your vehicle the same high gloss shine and lasting top coat protection at a fraction of the price:

Everyone at Wurzel Performance prides themselves in the quality of the products and services they provide: