Category: Peugeot

TUTORIAL: How to replace the Peugeot 207, 307 flip key case or key fob in 9 steps

If you want to replace the key case or jey fob from a Peugeot 207, 307, etc. you have to follow just 9 simple steps.

Necessary tools:

  • A nail
  • A hammer

 

STEP 1: open the key  fob to have acces at the inside pin and hit the nail with a hammer until you see the pin comes off

STEP 2: do the same with the new key fob

STEP 3: replace the blade for the new key and put the pin back

STEP 4: open the key fob with the blade of the other key

STEP 5: remove the electronic part from the old key case

STEP 6: open the new key case

STEP 7: move the electronic part and the battery to the new key case

STEP 8: put your new key fob back together

STEP 9: stick the new logo on the new key case.

See also these VIDEO TUTORIALS for VW Golf Mk4:

5 simple steps to remove passenger’s door panel VW Golf Mk4!

How to find PAINT CODE on a VW Golf Mk4 in just 10 seconds!

How to remove / replace headlight switch on a VW Golf Mk4!

How to remove RADIO CAGE in 7 steps!

 

How to set time / hour on Peugeot 307 in 7 simple steps

To set time or adjust the clock on Peugeot 307, you just have to follow just 7 simple steps. Watch the video below:

 

STEP 1: press both up and bottom buttons from the right side of the steering wheel

STEP 2: press once on the side button

STEP 3: use the scroll memo to select “HOUR”

STEP 4: select the hour using those two top and bottom buttons

STEP 5: select “MINUTES” using the scroll memo

STEP 6: set the minutes using those two top and bottom buttons

STEP 7: press the side button to exit the clock adjustment

Service light reset Peugeot 508 in 3 simple steps

If you want to reset service light / oil service on a Peugeot 508, you have to follow just 3 simple steps. Watch the video tutorial below:

 

STEP 1: press on the “000” button and keep pressing until…

STEP 2: …turn the key in the second position (don’t start the engine) and keep pressing until the countdown reaching zero

STEP3: realease the button and turn off the key

How to replace / remove gear knob Peugeot 207 in 3 steps

If you want to replace the gear knob from your Peugeot 207, this is what you have to do:

STEP 1: first, you have to release the gaitor housing

STEP 2: grab the gear knob and pull it up with force

STEP 3: remove the gaitor housing from the gear knob

Peugeot 308 service light reset i in 4 simple steps

How to reset service light on a Peugeot 308 in just 4 simple steps:

STEP 1: press the right button from the instrument cluster and keep pressing until…

STEP 2: …turn the key in the second position (whilst still holding the button), the display will count down from 10 to zero. When it reaches to zero you have to let go

STEP 3: release the button when it reaches to 0

STEP 4: turn off the key

To check if the reset was done properly, turn the key back on and wait to see if the “OIL OK” message appear on display.

 

TUTORIAL: service light reset / oil service reset Peugeot 307 in 4 simple steps

This is how you reset service light on a Peugeot 307 in 4 simple steps:

STEP 1: press the right button from the dashboard and keep pressing until…

STEP 2: …turn the key in the second position (whilst still holding the button), the display will count down from 10 to 0. When it reaches to 0 you have to let go

STEP 3: release the button when it reaches to 0

STEP 4: turn off the key

To check if the reset was done properly, turn the key back on and wait to see if on display will appear
the number of km set to the next service

How to reset oil service on Peugeot Partner / Citroen Berlingo in 4 steps

If you want to reset the service oil on a Peugeot Partner or a Citroen Berlingo you have to follow these 4 steps from the video below:

STEP 1: press and hold the left button from the instrument panel

STEP 2: turn the key on second position

Keep pushing the button until the count on display reaches to 0

STEP3: release the button

STEP 4: turn off the key

If you want to check that you reset the service oil correctly, turn the key back on and check if the key symbol has dissapeared from display and, also, if there’s a specific number of kilometers to the next service.