If you having problems with outside temperature on the dash (display) when you turn on the ignition on your VW Golf Mk4, Jetta, Bora, Skoda Octavia Mk1, Fabia, etc. and I mean when the temperature is innacurate or it’s not working properly, you should remove and replace or check the wires from the sensor. See the video tutorial below:
HERE you can find Ambient / Outside Temperature for VW Golf Mk4, Jetta, Bora, Skoda Fabia, Beetle: https://amzn.to/3f5MKX2
1. Remove the small grille front the bumper
Press on the top of the grille and then take it out
2. Use a flat blade screwdriver to remove the outside temperature sensor squeezing those ends
3. Disconnect the sensor from the wires using a flat blade screwdriver
Use a small flat blade screwdriver and try it from the front to lift the tab and then pull the sensor out.
Install the new sensor and put the small grille back on the bumper.
HERE you can find All-Included Pre-Built Bundles HELIOS is 100% plug and play on almost every car: https://bit.ly/2X27W8H
Get the best car wax sprays, ceramic coatings and DIY car detailing products – manufactured in the USA by professional detailers, at a fraction of the price: https://bit.ly/3ecVWHg
Everyone at Wurzel Performance prides themselves in the quality of the products and services they provide: https://bit.ly/2TBLIZ2
Here you can find LED Indicator Lights and Brake Turn Signal Lights for you car: https://bit.ly/3c4nJIq
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends.
Also, don’t forget to LIKE and SUBSCRIBE!
If you have any suggestions about new tutorials, let us know in the comments section!
See also the other VIDEO TUTORIALS for VW Golf Mk4: