TUTORIAL: How to reset tyre pressure monitoring system light (TPMS) on Nissan Micra, Juke in 4 steps

If you drive a Nissan Micra or a Juke and you see the tyre pressure monitoring system light (TPMS) is on, you just have to follow the next simple steps shown in the video tutorial below.

Find more Nissan Micra Products at the best prices HERE!

Find More Nissan Juke Products at the Best Prices HERE!

You have to know that for tyre pressure monitoring system to operate normally it must initialized whenever a tire pressure is adjusted, the tyre rotation is performed, a tire or a wheel is replaced, the battery is replaced or completely drained, or when the Tire Pressure Monitoring System warning light is illuminated.

1. Allow the tyres to cool down and then adjust the tyre pressure to the specified pressure indicated on the label
The tire pressure label is located on the driver doorjamb.
On this Nissan Micra the sticker says 2.2 bar on the front tyres and 2.2 bar on the rear tyres.
2. Switch the ignition on (don’t start the engine)
3. Press and hold the tire pressure monitoring system button until the tire pressure monitoring system warning light in the instrument cluster flashes twice and turns off
4. Release the button and switch the ignition off.
Switch on the ignition and check if the tyre pressure warning light remains on.

Here you can find LED Indicator Lights and Brake Turn Signal Lights for you car: https://bit.ly/3c4nJIq
HERE you can find All-Included Pre-Built Bundles HELIOS is 100% plug and play on almost every car: https://bit.ly/2X27W8H

Get the best car wax sprays, ceramic coatings and DIY car detailing products – manufactured in the USA by professional detailers for car enthusiasts and everyday drivers alike. These easy to use detailing products will give your vehicle the same high gloss shine and lasting top coat protection at a fraction of the price: https://bit.ly/3ecVWHg

Everyone at Wurzel Performance prides themselves in the quality of the products and services they provide: https://bit.ly/2TBLIZ2

If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don’t forget to LIKE and SUBSCRIBE!

More VIDEO TUTORIALS on http://www.servicetutorials.com/en/
Follow us on INSTAGRAM: https://www.instagram.com/service_tutorials/?hl=en
SUBSCRIBE our YOUTUBE channel: https://www.youtube.com/channel/UCwObVGIK_LGIYEoJxL6k-bg

This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!

If you have any suggestions about new tutorials, let us know in the comments section!