TUTORIAL: How to remove / replace door lock module on VW Golf Mk5, Jetta, Passat, Touran in 18 simple steps

In this VIDEO TUTORIAL we are going to show you how to remove / replace door lock module on VW Golf Mk5, Jetta, Touran, Passat in 18 simple steps.

Necessary tools:

–          A ratchet

–          T20 Torx

–          T30 Torx

–          A flat blade screwdriver

–          A plastic tool

–          An M8 Torx

 

1.       Open the door and pry off the panel inside of the door

2.       Remove the sticker and loosen up the screw from inside using a T20 Torx

3.       Use a plastic tool to remove the door lock cylinder (locking tumbler)

4.       Remove the clip using a flat blade screwdriver

5.       Slide the door handle to the right and take it out

6.       Remove the screw using a T20 Torx

7.       Remove the plastic panel from the door

8.       Open the door and remove all the T30 Torx bolts

9.       Close the door and remove the screw behind the rubber

10.   Remove all T30 Torx bolts

11.   Remove the T30 Torx bolts from the low side of the door

12.   Pull out the panel

13.   Remove the purple rubber band

14.   Remove the plastic cover from the door lock module

15.   Remove those two M8 bolts from the door lock module

16.   Remove the door lock module and take the cable out

17.   Remove the handle cable using a flat blade screwdriver

18.   Disconnect the wiring harness.

 

Leave a Reply

Your email address will not be published. Required fields are marked *