TUTORIAL: How to remove / install exterior outer door panel on VW Golf Mk5, Jetta in 12 simple steps

This time we are going to show you how to remove / install exterior outer door panel on VW Golf Mk5, Jetta in 12 simple steps. See the VIDEO TUTORIAL below.

Necessary tools:

–          A ratchet

–          T20 Torx

–          T30 Torx

–          A flat blade screwdriver

–          A plastic tool

 

1.       Open the door and pry off the panel inside of the door

2.       Remove the sticker and loosen up the screw from inside using a T20 Torx

3.       Use a plastic tool to remove the door lock cylinder (locking tumbler)

4.       Remove the clip using a flat blade screwdriver

5.       Slide the door handle to the right and take it out

6.       Remove the screw using a T20 Torx

7.       Remove the plastic panel from the door

8.       Open the door and remove all the T30 Torx bolts

9.       Close the door and remove the screw behind the rubber

10.   Remove all the T30 Torx bolts

11.   Remove the T30 Torx bolts from the low side of the door

12.   Pull out the panel.

See also these VIDEO TUTORIALS for VW Golf Mk5:

How to acces hidden / secret menu in 3 steps!

How to replace headlight bulb in 6 simple steps!

How to remove gear shift knob gaitor in 5 steps!

How to activate auto-lock & auto-unlock automatically with VCDS!

How to change MFA cluster displat language for VW Golf Mk5!

Leave a Reply

Your email address will not be published. Required fields are marked *