TUTORIAL: how to acces hidden menu on VW Golf Mk5, Jetta in 3 steps

If you want to find out what VW Golf Mk5 climatronic menu is hiding, you have to follow this 3 simple steps from the video below:

Before you start the engine, make sure that the gear shift is in the neutral position.

STEP 1: turn ignition on

STEP 2: turn the air conditioner on pushing the OFF button

STEP 3: press on the ECON button or AC (on other models) and the up-arrow button in the same time

To navigate through hidden menu use only the first two switches. On the left screen will be displayed a specific channel and on the right side the required values​​.To return to the original menu , press the ECON button (or AC on other models).

Below there’s a list of all the channels of the climatronic hidden meniu:

System Data Type
0 – 0 Program number Digital
0 – 1 ERL Left Digital
0 – 2 ERL Right Digital
0 – 3 Point being used Digital
0 – 4 Recirculating Automatic Digital
0 – 5 Stationary Heating Active Digital
0 – 6 Air Quality (7 = Fresh Air) Digital
0 – 7 Derived Digital
0 – 8 Country Acronym Digital
0 – 9 Sensor Zone Head °C

1. UIF

1 – 0 Internal Temperature °C

1 – 1 External Temperature °C

1-2 Temperature, Platelets, In, Platinum ° C

1-3 Corrector, Platelets, In, Platinum ° C

1-4 FIU – Sonnenint, Digital

1-5 Sun Intensity Corrected ° C

1-6 Corrector , Dynamic ° C

1-7 Corrector, recirculation ° C

1-8 concealer, Heat ° C

1-9 Compensation ignition UIF ° C

  1. Sun Intensity Sensor Left
    2 – 0 Sun Intensity Not Corrected W/m2
    2 – 1 Sun Intensity Corrected W/m2
    2 – 2 Fan Correction W/m2
    2 – 3 Value Digital3. Sun Intensity Sensor Right
    3 – 0 Sun Intensity Not Corrected W/m2
    3 – 1 Sun Intensity Corrected W/m2
    3 – 2 Fan Correction W/m2
    3 – 3 Value Digital4 . External Temperature
    4 – 0 Temperature External °C
    4 – 1 Temperature External CANBUS °C
    4 – 2 Temperature Intake °C5. Temperature Left Setpoint
    5 – 0 Temperature Output °C
    5 – 1 Difference between temp and temp setpoint °C
    5 – 2 Regulator Setting (½%)
    5 – 3 Pi-Stell-Max? (½%)
    5 – 4 Defrost Digital6. Temperature Left Actual
    6 – 0 Temperature °C
    6 – 1 Footwell °C
    6 – 2 Vents °C

    7. Temperature Right Setpoint
    7 – 0 Temperature Output °C
    7 – 1 Difference between temp and temp setpoint °C
    7 – 2 Regulator Setting (½%)
    7 – 3 Pi-Stell-Max? (½%)
    7 – 4 Defrost Digital

    8. Temperature Right Actual
    8 – 0 Temperature °C
    8 – 1 Footwell °C
    8 – 2 Vents °C

    9. Evaporator Temperature Setpoint
    9 – 0 Evaporator temperature °C
    9 – 1 Difference between temp actual and temp Setpoint °C
    9 – 2 Evaporator value settings 5mA/Dig
    9 – 3 Sensor Sight

    10. Evaporator Temperature Actual
    10 – 0 Evaporator Temperature °C
    10 – 1 Liquid refigerant pressure bar
    10 – 2 Liquid refigerant temperature °C

    11. AC Compressor
    11 – 0 Power setpoint mA
    11 – 1 Power actual mA
    11 – 2 Power maximum mA
    11 – 3 Compressor PWM Digital (0-200)
    11 – 4 Power offset compressor
    11 – 5 Power value Digital
    11 – 6 Compressor code

    12. Climate Control Fan
    12 – 0 Fan Setpoint Voltage V
    12 – 1 Manual regulation
    12 – 2 Code anomaly
    12 – 3 Reduction impeller V
    12 – 4 Impeller offset 0.1V

    13. Temperature Air Vent Left
    13 – 0 Setpoint value %
    13 – 1 Setpoint temperature Digital
    13 – 2 Actual Temperature Digital
    13 – 3 Maximum Temperature Digital
    13 – 4 Minimum Temperature Digital

    14. Temperature Air Vent Right
    14 – 0 Setpoint value %
    14 – 1 Setpoint temperature Digital
    14 – 2 Actual Temperature Digital
    14 – 3 Maximum Temperature Digital
    14 – 4 Minimum Temperature Digital

    15. Temperature Air Vent Diffuser
    15 – 0 Setpoint value %
    15 – 1 Setpoint temperature Digital
    15 – 2 Actual Temperature Digital
    15 – 3 Maximum Temperature Digital
    15 – 4 Minimum Temperature Digital

    16. Temperature Air Vent Defrost
    16 – 0 Setpoint Value %
    16 – 1 Setpoint temperature Digital
    16 – 2 Actual Temperature Digital
    16 – 3 Maximum Temperature Digital
    16 – 4 Minimum Temperature Digital

    17. Temperature Internal Recirculation
    17 – 0 Setpoint Value %
    17 – 1 Setpoint temperature Digital
    17 – 2 Actual Temperature Digital
    17 – 3 Maximum Temperature Digital
    17 – 4 Minimum Temperature Digital

    18. Temperature External Air
    18 – 0 Setpoint Value %
    18 – 1 Setpoint temperature Digital
    18 – 2 Actual Temperature Digital
    18 – 3 Maximum Temperature Digital
    18 – 4 Minimum Temperature Digital

    19. Engine Data
    19 – 0 Vehicle Speed (kph) kph
    19 – 1 Vehicle Speed (mph) mph
    19 – 2 Engine Temperature °C
    19 – 3 Engine speed RPM
    19 – 4 AC compress speed RPM

    20. CANBUS Data
    20 – 0 Additional Heating 1=on
    20 – 1 PTC Confirmation 1=on
    20 – 2 Effective Power PTC A
    20 – 3 Air requested from external %
    20 – 4 External air percentage cooler %
    20 – 5 Performance heating 1=no external provision

    21. Air Distribution
    21 – 0 Defrost %
    21 – 1 Face %
    21 – 2 Feet %
    21 – 3 Air Vent Diffuser %
    21 – 4 Recirculated %
    21 – 5 Air Sensor %

    22. Time
    22 – 0 Engine Off Time minutes
    22 – 1 Engine Operating Time seconds
    22 – 2 Operating Time with Ignition On seconds

    23. Special. Channel
    23 – 0 Inner Lighting Sensor Digital
    23 – 1 Air Quality Sensor

    24. Software Version
    24 – 0 Development State
    24 – 1 Software Version
    24 – 2 Type of Software
    24 – 3 Keep Frozen 0/1 – Diagnosis
    24 – 4 Version K Matrix
    24 – 5 EEP – Testflags
    24 – 6 Encryption Vag (2)

    25. Test Channels
    25 – 0 Channel 0
    25 – 1 Channel 1
    25 – 2 Channel 2
    25 – 3 Channel 3
    25 – 4 Channel 4
    25 – 5 Channel 5
    25 – 6 Channel 6
    25 – 7 Channel 7
    25 – 8 Channel 8
    25 – 9 Channel 9

    26. Parameters for inventory on crystals
    26 – 0 Delay seconds
    26 – 1 Step/udm? (Digital) Digital
    26 – 2 Minimal Limit (Digital) Digital
    26 – 3 Maximum Limit (Digital) Digital
    26 – 4 Step/udm? HellaKit? 1=connected

    27. Direct Ventalation
    27 – 0 Setpoint Value %
    27 – 1 Setpoint temperature Digital
    27 – 2 Actual Temperature Digital
    27 – 3 Maximum Temperature Digital
    27 – 4 Minimum Temperature Digital

    28. Humdity
    28 – 0 Setpoint Humdity %
    28 – 1 Relative Humdity %
    28 – 2 Temperatur Crystal WSS °C
    28 – 3 Dewpoint temperature °C
    28 – 4 Melting point °C

    29. Raw Humdity
    29 – 0 Tempertaure crystals corrected °C
    29 – 1 Tempertaure crystals uncorrected °C
    29 – 2 Humdity Sensor %
    29 – 3 Temperature sensor °C
    29 – 4 Dewpoint temperature (measurement test) °C
    29 – 5 Code anomaly

    30. Humdity Values
    30 – 0 Thermophilic sensor value Digital
    30 – 1 Thermophilic sensor reference Digital
    30 – 2 Moisture duration 10 to the power of -4 sec
    30 – 3 Humdity reference temperature Digital
    30 – 4 Humdity sensor %
    30 – 5 Temperature sensor °C
    30 – 6 Temperature sensor (uncorrected) °C


See also the other TUTORIALS for VW Golf 5:

6 steps to change the light bulb on Golf Mk5!

How to change / replace the fuel pump on a VW Golf Mk5 TDI!

How to replace / change the oil on Golf Mk5!

How to change / replace a VW, Skoda, Audi key remote battery!

34 de comentarii la „TUTORIAL: how to acces hidden menu on VW Golf Mk5, Jetta in 3 steps”

  1. Ceva tutorial pentru bypass airbag scaun sofer aveti ? stiu ca in mod normal nu se face asa ceva, dar deja ma dispera eroarea care tot apare la fiecare 2 zile, firele sunt legate pe direct anuland cele doua mufe ….am inteles ca se poate face asta cu ajutorul unei rezistente dar nu stiu pe ce fire trebuie legate ele …. si de cat sa fie rezistenta, solutie pentru GOLF 5

  2. Salut. Am o mică problemă, nu mai bagă ac la temperatura scăzută cum trebuie. Am pus un tester și mi sa spus că nu prea am folosit Ac. Cei drept ăsta iarnă nu prea am folosi Ac la parbriz deoarece am avut o husă pentru parbriz si nu îmi mai îngheța. El bagă aer rece dar la setarea LO nu este suficient de rece.Cei de la tester mi-au spus să verific mufele de curent,mufa sau senzorol depresiune. Nu știu ce să mai fac . Vă mulțumesc.

  3. Acest meniu este valabil si la pas sat.detin un pas sat b6 si am încercat acest.recunosc nu lam încercat pînă la capăt doar in zona 19

  4. Salut,

    Care este meniul pentru presiunea din turbina ?
    Se poate afla si consumul ?

    Multumesc !

  5. Buna.sunt Alina..Cu greu am strâns bănuti pentru o masina.am reusit să cumpăr un golf 5 Go al.am văzut pe bord o eroare .m.am uitat pe net.e ceva legat de o defectiune a motorului.în loc să fiu bucuroasa ca mi.am cumpărat mai rău sunt supărată.din acest motiv.Vă rog ajutati.ma.cat de grava e defectiunea.pot circula cu ea?nu la drum lung.până adun bănuti să o pot repara.multumesc celor ce mă pot ajuta.

  6. Salut.sczati-ma dacă postez greșit,dar nevoia ma împinge sa fac asta.de la un tip de vreme (mai exact 3-5zile).golful meu tdi face:
    -apa ajunge doar în jur de a doua liniUță mai jos de 90 de grade .
    -cind dau drumul la clima scade apa și mai mult.
    -în zona pasagerului, la picioare, sunt vreo 3 gauri rotunde pin care iese aer călduț iar mai jos în zona filtrului de polen, aer rece de afara.oricare ar fi temperatura setata.
    Dacă închid clima temperatura își revine la poziția prezentata mai sus.
    Am scos filtru și l-am lăsat asa scos.prin locașul filtrului musai aer rece.
    O FI TERMOSTATUL ȘI VREUN MOTORAS DE LA VREUN CLAPET DEFECT?
    aștept păreri .

  7. In filmuletul postat pe youtube se face referire si la un canal in care se citeste presiunea la turbina. Va rog sa imi spuneti si mie care este acela, desi nu cred ca exista si doar ne ati dezinformat aiurea.

  8. Salut, am doua intrebari:
    1. Cum pot remedia problema cu aerul cald, deoarece in partea soferului la picioare si pe partea stanga , baga intotdeauna caldura chit ca setez rece la climatronic, iar in celelalte merge normal.
    2. Am o problema cand pornesc motorul , doar atunci cand temperatura ajunge la 85-90 de grade, in rest porneste normal, dar cand e cald motorul, imi porneste foarte greu ca si cand s-ar ineca, si porneste cam in 3-4 secunde . Am schimbat si senzorul de temperatura.

  9. Salut ! Din acest meniu ascuns pot accesa încălzirea auxiliară,webasto? Mașina este un touran 1.9. M-ar interesa dacă ii pot schimba temperatura, de pornire,aceasta făcându-se automat la 4grade C după ce pornesc motorul și implicit clima! Va mulțumesc !

  10. cum se schimba un bec xenon la un touran, 2.0 l, 103KW, BKD.
    daca ma puteti ajuta?

    multumesc, Ionel

Leave a Reply

Your email address will not be published. Required fields are marked *